Publication

P-56: Cryogenic Vaporization Systems—Prevention of Brittle Fracture of Equipment and Piping

Abstract

This publication applies to cryogenic liquid supply systems, located either on a customer site or a production site, where cryogenic liquid is vaporized and is then supplied either as the primary or secondary source of gaseous product. This publication is limited to the prevention of brittle fracture in piping and associated equipment installed downstream of the vaporization system.

The secondary source of supply can be a back-up supply to a production plant when the production plant trips or is shut down, a supplementary supply to meet customer demand where it exceeds the capacity of the production plant (peak shaving), or as a back-up supply at a customer site (for example, a healthcare facility).

The safeguard principles presented in this publication apply to any process fluid supply system where the temperature of the cryogenic liquid source is less than the minimum temperature rating of the piping and/or associated equipment downstream of the vaporizer.

Although this publication does not cover the following situations, the techniques listed may be considered for cold embrittlement prevention:
• Air separation and other cryogenic processes with columns, separators, or tanks in which a gas stream from a sump is normally supplied through downstream heat exchange equipment, or liquefaction units where a cryogenic fluid can exit through warm-end process piping during a shutdown or upset scenario. Cryogenic processes are assumed to have their own LTPS;
• Piping systems within which a fluid is expanded across a valve or restriction with the resultant temperature being less than the ductile-to-brittle-transition-temperature (DBTT) for the piping system; and
• Vessels that are depressurized rapidly: as work is done in a vessel by a gas expanding as it is discharged out of the valve, the temperature inside the vessel and the vessel wall can be lowered.

This publication recommends safe practice for the design of new cryogenic vaporizer systems. For existing systems, a risk assessment shall be undertaken to establish if any modifications are required. The principles developed in this publication can be used for this purpose.

Access Publication

Member Price:
$64
Subscriber Price:
$64
Non-Member Price:
$116

Member E-Pub Price:
$0
Subscriber E-Pub Price:
$0
Non-Member E-Pub Price:
$116
Buy Hard Copy
Purchase E-Pub
View Table of Contents (free)

Properties

Edition:
3
Published:
November 2022
Status:
Available To the Public
Size:
27 pages
Publisher:
CGA
Special Attributes:
Harmonized
Notes:
Harmonized with EIGA Doc 133
Committee:
Atmospheric Gases and Equipment